10 July 2026, 05:36 PM
If you are planning to manufacture or sell products covered under BIS Scheme X Certification in India, obtaining the certification is an important requirement before introducing your products into the Indian market. BIS Scheme X is a mandatory certification introduced by the Bureau of Indian Standards (BIS) for notified low-voltage switchgear and control gear products. The certification ensures that products comply with the applicable Indian safety and quality standards.
Both Indian and foreign manufacturers whose products fall under the notified category must obtain the required certification before selling their products in India. Understanding the certification process in advance can help businesses prepare the required documents and complete the application without unnecessary delays.
Process to Obtain BIS Scheme X Certification in India
The certification process generally includes the following steps:
1. Prepare the Documents
The first step is to prepare all the required documents according to the prescribed BIS checklist. The applicant should carefully collect and organize all supporting documents before submitting the application. Proper documentation is important because incomplete or incorrect information may delay the certification process.
2. Submit the Application
After preparing the required documents, the applicant must submit the application to the Bureau of Indian Standards (BIS). The application should be submitted along with the product test report issued by a BIS-approved laboratory and all supporting documents. Once the application is received, BIS begins reviewing the submitted information and initiates the certification process.
3. Factory Inspection by BIS Officials
After reviewing the application, BIS officials visit the manufacturing facility to conduct a factory inspection. During the inspection, the officials review the manufacturing process, production facilities, testing equipment, quality control procedures, and overall manufacturing practices. The purpose of the inspection is to verify that the manufacturer is capable of producing products that comply with the applicable BIS standards on a consistent basis.
Manufacturers should ensure that their factory and quality management system are properly maintained before the inspection takes place.
4. Grant of BIS Scheme X Certification
Once BIS successfully verifies the application, supporting documents, product test report, and factory inspection findings, the BIS Scheme X Certification is granted to the applicant. After receiving the certification, manufacturers can supply the applicable products in the Indian market in accordance with the relevant BIS requirements.
Why Choose Brand Liaison?
Obtaining BIS certification involves technical documentation, coordination with laboratories, factory inspections, and compliance with BIS requirements. Managing the entire process without professional guidance can sometimes be challenging, especially for first-time applicants and foreign manufacturers.
Brand Liaison provides complete support for BIS Scheme X Certification in India. Our experienced team assists businesses with:
Conclusion
Obtaining BIS Scheme X Certification in India is an important requirement for manufacturers of notified low-voltage switchgear and control gear products. By preparing the required documents, submitting the application with a BIS-approved laboratory test report, completing the factory inspection, and meeting the applicable BIS requirements, manufacturers can obtain certification and sell their products in the Indian market.
If you are looking for professional assistance, Brand Liaison provides complete consultancy support for BIS Scheme X Certification, helping businesses complete the certification process smoothly, efficiently, and in compliance with BIS requirements.
Both Indian and foreign manufacturers whose products fall under the notified category must obtain the required certification before selling their products in India. Understanding the certification process in advance can help businesses prepare the required documents and complete the application without unnecessary delays.
Process to Obtain BIS Scheme X Certification in India
The certification process generally includes the following steps:
1. Prepare the Documents
The first step is to prepare all the required documents according to the prescribed BIS checklist. The applicant should carefully collect and organize all supporting documents before submitting the application. Proper documentation is important because incomplete or incorrect information may delay the certification process.
2. Submit the Application
After preparing the required documents, the applicant must submit the application to the Bureau of Indian Standards (BIS). The application should be submitted along with the product test report issued by a BIS-approved laboratory and all supporting documents. Once the application is received, BIS begins reviewing the submitted information and initiates the certification process.
3. Factory Inspection by BIS Officials
After reviewing the application, BIS officials visit the manufacturing facility to conduct a factory inspection. During the inspection, the officials review the manufacturing process, production facilities, testing equipment, quality control procedures, and overall manufacturing practices. The purpose of the inspection is to verify that the manufacturer is capable of producing products that comply with the applicable BIS standards on a consistent basis.
Manufacturers should ensure that their factory and quality management system are properly maintained before the inspection takes place.
4. Grant of BIS Scheme X Certification
Once BIS successfully verifies the application, supporting documents, product test report, and factory inspection findings, the BIS Scheme X Certification is granted to the applicant. After receiving the certification, manufacturers can supply the applicable products in the Indian market in accordance with the relevant BIS requirements.
Why Choose Brand Liaison?
Obtaining BIS certification involves technical documentation, coordination with laboratories, factory inspections, and compliance with BIS requirements. Managing the entire process without professional guidance can sometimes be challenging, especially for first-time applicants and foreign manufacturers.
Brand Liaison provides complete support for BIS Scheme X Certification in India. Our experienced team assists businesses with:
- Document preparation
- Application filing
- Compliance guidance
- Coordination during the certification process
- End-to-end certification support
Conclusion
Obtaining BIS Scheme X Certification in India is an important requirement for manufacturers of notified low-voltage switchgear and control gear products. By preparing the required documents, submitting the application with a BIS-approved laboratory test report, completing the factory inspection, and meeting the applicable BIS requirements, manufacturers can obtain certification and sell their products in the Indian market.
If you are looking for professional assistance, Brand Liaison provides complete consultancy support for BIS Scheme X Certification, helping businesses complete the certification process smoothly, efficiently, and in compliance with BIS requirements.