14 November 2025, 02:37 PM
1. Cat Bed From A Sweater
2. Favorite Box
3. Slipper-Shaped
- You will need: a sweater, threads, sewing supplies and filler
- (holofiber or synthetic down, any that is at hand).
- Sew the neck and sew the sweater in a semicircle from one armpit to the other.
- Fill the sleeves with filler and the entire upper part along with the neck (which was sewn up).
- Stuff the bottom of the product (a place where it will be comfortable for the pet to sleep) and sew the bottom.
- Now insert the sleeve into the sleeve and sew it together.
- Sew the sleeves to the base and a comfortable, soft pet bed with sides is ready.
2. Favorite Box
- Measure the box, cut out a rectangle according to the specified dimensions.
- Separately, prepare a rectangle - this will be a pillow for the bed, put the filler inside and sew around the perimeter.
- Measure the height of the box and add +10 cm on each side.
- Put the fabric in the box, use a hot gun to glue the edges of the fabric to the sides of the box.
- Put a pillow in the bed, and call the cat.
- In order for the box not to slip, you can glue pieces of anti-slip fabric to the base.
- The box has been transformed, the cat will be happy to sleep in it.
3. Slipper-Shaped
- Bed Such a bed has a very unusual shape. Cats especially like it (there is
- A small shed, cats like to hide there).
- You will need fleece fabric, and the filler in this case will be polyester.
- You can draw the pattern yourself, it all depends on the size of the cat. For an average cat, the dimensions of the pattern: the lower part is 55x40 cm, the top is 60x40 cm.
- Make a pattern from fabric, put a filler folded in three layers in the middle.
- Sew each part along the contour, and sew both parts together so that the shape of the bed becomes similar to a slipper.